dgvic

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 14, 2016 at 10:48 am in reply to: Seg. fault when creating wire in sch view #1865
    dgvic
    Participant

    Ok, thank you.

    As I told you, everything can be done without problems with infix turned on, so I posted the message just to report the bug, there is no real hurry.

    Thanks and regards,

    December 13, 2016 at 12:23 pm in reply to: Seg. fault when creating wire in sch view #1861
    dgvic
    Participant

    No, it doesn't crash. But, for example, when you try to create a pin everything is ok until you click on the position where you want to place it. When you click in the position where you want to place the pin, glade simply does nothing; the Message Window shows the position of the point you just selected but the pin is not created in that point. The cursor keeps moving with the shape of the pin (see figure) as if you hadn't click on the canvas of the schematic.

    I'm working on a VirtualBox with ubuntu 16.04.1 vm. The underlying OS is windows 10.

    December 13, 2016 at 11:27 am in reply to: Seg. fault when creating wire in sch view #1859
    dgvic
    Participant

    Hi,
    thank you for your reply. I did what you told me, and things seems to work fine BUT only when I set the 'Display options->Miscellaneous->Use cursor position for commands' to true. When this option is set to false, not only wires, but also the insertion of pins and instances in the schematic don't work.

    For the moment I can work with the option set, but I guess that it is better to report the bug….I didn't check other threads in the forum, so probably someone already did report it..

    Thanks and regards

    December 12, 2016 at 5:34 pm in reply to: Seg. fault when creating wire in sch view #1857
    dgvic
    Participant

    Hi all,
    I am trying to create a schematic view in a new cell. I can create instances in the schematic without problem, but when I try to create a wire I get the error shown below.

    I am now working under Ubunt 16.04.1 in a Virtual Machine.

    Thanks and regards,

    signal 11 (Segmentation fault), address is 0x38 from 0x8d11c00

    Stack Trace:
    [2]: glade : guiSchCanvas::isPointOnWire(QPoint&) 148364084 + 148364089
    [3]: glade : guiSchCanvas::cmdAddLineStart() 148364144 + 148364149
    [4]: glade : guiEventFilter::eventFilter(QObject*, QEvent*) 148364218 + 148364225
    [5]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Core.so.5 : QCoreApplicationPrivate::sendThroughObjectEventFilters(QObject*, QEvent*) 148364367 + 148364373
    [6]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Widgets.so.5 : QApplicationPrivate::notify_helper(QObject*, QEvent*) 148364504 + 148364509
    [7]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Widgets.so.5 : QApplication::notify(QObject*, QEvent*) 148364625 + 148364632
    [8]: glade : guiApplication::notify(QObject*, QEvent*) 148364701 + 148364706
    [9]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Core.so.5 : QCoreApplication::notifyInternal2(QObject*, QEvent*) 148364827 + 148364833
    [10]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Widgets.so.5 : 148364907 + 148364916
    [11]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Widgets.so.5 : QApplicationPrivate::notify_helper(QObject*, QEvent*) 148365047 + 148365052
    [12]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Widgets.so.5 : QApplication::notify(QObject*, QEvent*) 148365168 + 148365174
    [13]: glade : guiApplication::notify(QObject*, QEvent*) 148365243 + 148365248
    [14]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Core.so.5 : QCoreApplication::notifyInternal2(QObject*, QEvent*) 148365369 + 148365375
    [15]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Gui.so.5 : QGuiApplicationPrivate::processKeyEvent(QWindowSystemInterfacePrivate::KeyEvent*) 148365533 + 148365538
    [16]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Gui.so.5 : QGuiApplicationPrivate::processWindowSystemEvent(QWindowSystemInterfacePrivate::WindowSystemEvent*) 148365715 + 148365721
    [17]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Gui.so.5 : QWindowSystemInterfacePrivate::handleWindowSystemEvent(QWindowSystemInterfacePrivate::WindowSystemEvent*) 148365875 + 148365880
    [18]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Gui.so.5 : QWindowSystemInterface::handleShortcutEvent(QWindow*, unsigned long, int, QFlags<Qt::KeyboardModifier>, unsigned int, unsigned int, unsigned int, QString const&, bool, unsigned short) 148366057 + 148366063
    [19]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Gui.so.5 : QGuiApplicationPrivate::processKeyEvent(QWindowSystemInterfacePrivate::KeyEvent*) 148366221 + 148366227
    [20]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Gui.so.5 : QGuiApplicationPrivate::processWindowSystemEvent(QWindowSystemInterfacePrivate::WindowSystemEvent*) 148366404 + 148366410
    [21]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Gui.so.5 : QWindowSystemInterface::sendWindowSystemEvents(QFlags<QEventLoop::ProcessEventsFlag>) 148366574 + 148366579
    [22]: /eda/glade4_linux64_ub16/bin/platforms/../../lib/libQt5XcbQpa.so.5 : 148366665 + 148366673
    [23]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Core.so.5 : QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) 148366797 + 148366803
    [24]: /eda/glade4_linux64_ub16/bin/../lib/libQt5Core.so.5 : QCoreApplication::exec() 148366902 + 148366907
    [25]: glade : guiMain::startApp() 148366954 + 148366961
    [26]: glade : guiMain::runWithExceptionHandler() 148367018 + 148367022
    [27]: glade : guiMain::runWithLogging() 148367070 + 148367075
    [28]: glade : guiMain::run() 148367111 + 148367115
    [29]: glade : main 148367138 + 148367143
    [30]: /lib/x86_64-linux-gnu/libc.so.6 : __libc_start_main 148367205 + 148367210
    [31]: glade : _start 148367241 + 148367246

    Build info:
    Glade release version 4.5.16 compiled on Dec 11 2016 14:46:22
    OS: Linux edamgr-vb 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

    # Glade copyright 2016 Peardrop Design Systems. All rights reserved.
    # Glade release version 4.5.16 compiled on Dec 11 2016 14:46:22
    # Qt version 5.6.0 on 64 bit platform (little endian)
    # Compiled with gcc version 5.4.0
    # Log file: /home/edamgr/glade_12.12.2016_17.41.29.log
    # Username: edamgr Hostname: edamgr-vb
    # Current time: Mon Dec 12 17:41:29 2016
    # Operating system: Linux edamgr-vb 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
    # Number of CPUs: 1
    # Available memory: 3951 Mb
    # Display 0: Screen size (pixels): 1920 x 950
    # Logical dpi: 96.0 Physical dpi: 96.1
    # Display Scale Factor: 1.00
    # Python version 2.7.8 (default, Jul 17 2016, 08:19:51)
    [GCC 5.3.1 20160413] for linux2
    Reading cell gnd view symbol
    Reading cell iopin view symbol
    Reading cell ipin view symbol
    Reading cell opin view symbol
    Reading cell vcc view symbol
    Reading cell vdd view symbol
    Reading cell vss view symbol
    # INFO: Loaded library basic from /eda/glade4_linux64_ub16/basic
    ui().fileNewLib()
    # INFO: Creating library libgex01!
    # INFO: Creating layer psub purpose drawing
    # INFO: Creating layer nwell purpose drawing
    # INFO: Creating layer od purpose drawing
    # INFO: Creating layer polyg purpose drawing
    # INFO: Creating layer nimp purpose drawing
    # INFO: Creating layer pimp purpose drawing
    # INFO: Creating layer cont purpose drawing
    # INFO: Creating layer metal1 purpose drawing
    # INFO: Creating layer via12 purpose drawing
    # INFO: Creating layer metal2 purpose drawing
    # INFO: Creating layer via23 purpose drawing
    # INFO: Creating layer metal3 purpose drawing
    # INFO: Creating layer via34 purpose drawing
    # INFO: Creating layer metal4 purpose drawing
    # INFO: Creating layer via45 purpose drawing
    # INFO: Creating layer metal5 purpose drawing
    # INFO: Creating layer via56 purpose drawing
    # INFO: Creating layer metal6 purpose drawing
    # INFO: Creating layer rpo purpose drawing
    # INFO: Creating layer cap purpose drawing
    # INFO: Creating layer potxt purpose drawing
    # INFO: Creating layer m1txt purpose drawing
    # INFO: Creating layer m2txt purpose drawing
    # INFO: Layer nwell purpose drawing minWidth rule 1.800
    # INFO: Layer nwell purpose drawing minSpace rule 1.200
    # INFO: Layer od purpose drawing minWidth rule 0.150
    # INFO: Layer od purpose drawing minSpace rule 0.210
    # INFO: Layer polyg purpose drawing minWidth rule 0.130
    # INFO: Layer polyg purpose drawing minSpace rule 0.180
    # INFO: Layer pimp purpose drawing minWidth rule 0.310
    # INFO: Layer pimp purpose drawing minSpace rule 0.310
    # INFO: Layer nimp purpose drawing minWidth rule 0.310
    # INFO: Layer nimp purpose drawing minSpace rule 0.310
    # INFO: Layer cont purpose drawing minWidth rule 0.160
    # INFO: Layer cont purpose drawing minSpace rule 0.180
    # INFO: Layer metal1 purpose drawing minWidth rule 0.160
    # INFO: Layer metal1 purpose drawing minSpace rule 0.180
    # INFO: Layer via12 purpose drawing minWidth rule 0.190
    # INFO: Layer via12 purpose drawing minSpace rule 0.220
    # INFO: Layer metal2 purpose drawing minWidth rule 0.160
    # INFO: Layer metal2 purpose drawing minSpace rule 0.180
    # INFO: Layer via23 purpose drawing minWidth rule 0.190
    # INFO: Layer via23 purpose drawing minSpace rule 0.220
    # INFO: Layer metal3 purpose drawing minWidth rule 0.160
    # INFO: Layer metal3 purpose drawing minSpace rule 0.180
    # INFO: Layer via34 purpose drawing minWidth rule 0.190
    # INFO: Layer via34 purpose drawing minSpace rule 0.220
    # INFO: Layer metal4 purpose drawing minWidth rule 0.160
    # INFO: Layer metal4 purpose drawing minSpace rule 0.180
    # INFO: Layer via45 purpose drawing minWidth rule 0.190
    # INFO: Layer via45 purpose drawing minSpace rule 0.220
    # INFO: Layer metal5 purpose drawing minWidth rule 0.160
    # INFO: Layer metal5 purpose drawing minSpace rule 0.180
    # INFO: Layer via56 purpose drawing minWidth rule 0.360
    # INFO: Layer via56 purpose drawing minSpace rule 0.350
    # INFO: Layer metal6 purpose drawing minWidth rule 0.440
    # INFO: Layer metal6 purpose drawing minSpace rule 0.460
    # INFO: Layer rpo purpose drawing minSpace rule 0.430
    # INFO: Layer rpo purpose drawing minWidth rule 0.430
    # INFO: Creating via od_m1
    # INFO: Creating via polyg_m1
    # INFO: Creating via m1_m2
    # INFO: Creating via m1_m2_1x2
    # INFO: Creating via m1_m2_2x1
    # INFO: Creating via m2_m3
    # INFO: Creating via m2_m3_1x2
    # INFO: Creating via m2_m3_2x1
    # INFO: Creating via m3_m4
    # INFO: Creating via m4_m5
    # INFO: Creating via m5_m6
    # WARNING: Deleting existing MPPs…
    # INFO: Adding MPP layer nwell drawing to rule nguard
    # INFO: Adding MPP layer od drawing to rule nguard
    # INFO: Adding MPP layer nimp drawing to rule nguard
    # INFO: Adding MPP layer cont drawing to rule nguard
    # INFO: Adding MPP layer metal1 drawing to rule nguard
    # INFO: Adding MPP layer od drawing to rule pguard
    # INFO: Adding MPP layer pimp drawing to rule pguard
    # INFO: Adding MPP layer cont drawing to rule pguard
    # INFO: Adding MPP layer metal1 drawing to rule pguard
    # WARNING: Line 185: Line plain already defined, ignoring.
    # WARNING: Line 186: Line thicksolid already defined, ignoring.
    # WARNING: Line 187: Line thick already defined, ignoring.
    # WARNING: Line 188: Line dashed2 already defined, ignoring.
    # WARNING: Line 189: Line dotted already defined, ignoring.
    # WARNING: Line 190: Line dashdot already defined, ignoring.
    # WARNING: Line 191: Line dashdotdot already defined, ignoring.
    # WARNING: Line 23: Stipple zagl already defined, ignoring.
    # WARNING: Line 23: Stipple zagr already defined, ignoring.
    # WARNING: Line 23: Stipple dots1 already defined, ignoring.
    # WARNING: Line 23: Stipple dots2 already defined, ignoring.
    # WARNING: Line 23: Stipple dots3 already defined, ignoring.
    # WARNING: Line 23: Stipple solid already defined, ignoring.
    # WARNING: Line 23: Stipple empty already defined, ignoring.
    # WARNING: Line 23: Stipple cross already defined, ignoring.
    # WARNING: Line 23: Stipple brick already defined, ignoring.
    # WARNING: Line 23: Stipple dots4 already defined, ignoring.
    ui().fileNewLib()
    ui().openCellView("libgex01", "nmos_x", "symbol")
    # INFO: Opened cell nmos_x view symbol
    # INFO: Adding line point #1 at (0.000, 10.000)
    # INFO: Adding line point #2 at (0.000, -10.300)
    # INFO: Adding line point #3 at (9.900, -10.300)
    # INFO: Adding line point #4 at (9.900, -10.250)
    # INFO: Created line with 4 points
    ui().selectPoint(9900, -10250, 0)
    # INFO: Adding line point #1 at (0.050, 10.000)
    # INFO: Adding line point #2 at (10.200, 10.000)
    # INFO: Adding line point #3 at (10.200, 9.900)
    # INFO: Created line with 3 points
    ui().selectPoint(10200, 9900, 0)
    ui().selectPoint(-1000, 200, 0)
    # INFO: Adding line point #1 at (-0.950, 0.000)
    # INFO: Adding line point #2 at (-3.600, 0.000)
    # INFO: Created line with 2 points
    ui().selectPoint(-3600, 0, 0)
    ui().selectPoint(-3300, -1200, 0)
    # INFO: Creating pin g at (-4.400, 0.000)
    ui().selectPoint(-4350, 50, 0)
    ui().selectPoint(-4100, -200, 0)
    ui().fileOpenLib()
    Opening library example
    # INFO: Creating layer nwell purpose drawing
    # INFO: Creating layer od purpose drawing
    # INFO: Creating layer polyg purpose drawing
    # INFO: Creating layer nimp purpose drawing
    # INFO: Creating layer pimp purpose drawing
    # INFO: Creating layer cont purpose drawing
    # INFO: Creating layer metal1 purpose drawing
    # INFO: Creating layer via12 purpose drawing
    # INFO: Creating layer metal2 purpose drawing
    # INFO: Creating layer via23 purpose drawing
    # INFO: Creating layer metal3 purpose drawing
    # INFO: Creating layer via34 purpose drawing
    # INFO: Creating layer metal4 purpose drawing
    # INFO: Creating layer via45 purpose drawing
    # INFO: Creating layer metal5 purpose drawing
    # INFO: Creating layer via56 purpose drawing
    # INFO: Creating layer metal6 purpose drawing
    # INFO: Creating layer rpo purpose drawing
    # INFO: Creating layer potxt purpose drawing
    # INFO: Creating layer m1txt purpose drawing
    # INFO: Creating layer cap purpose drawing
    # INFO: Creating layer psub purpose drawing
    # INFO: Creating layer m2txt purpose drawing
    Reading cell dtype view schematic
    Reading cell dtype view symbol
    Reading cell inv view schematic
    Reading cell inv view symbol
    Reading cell moscap view layout
    Reading cell moscap view symbol
    Reading cell moscap$l=8$w=8$ view layout
    Reading cell nand2 view schematic
    Reading cell nand2 view symbol
    Reading cell nand3 view schematic
    Reading cell nand3 view symbol
    Reading cell nmos13_multi view layout
    Reading cell nmos13_multi view symbol
    Reading cell nmos13_multi$rightCnt=1$leftCnt=1$polyCnt=1$m=1$l=0.7$w=2$ view layout
    Reading cell nmos13_multi$rightCnt=1$leftCnt=1$polyCnt=1$m=1$l=1.2$w=5$ view layout
    Reading cell nor2 view schematic
    Reading cell nor2 view symbol
    Reading cell nor3 view schematic
    Reading cell nor3 view symbol
    Reading cell opamp view layout
    Reading cell opamp view schematic
    # WARNING: Inst name I18 already exists, renaming to I20
    # WARNING: Inst name I19 already exists, renaming to I21
    Reading cell pmos13_multi view layout
    Reading cell pmos13_multi view symbol
    Reading cell pmos13_multi$rightCnt=1$leftCnt=1$polyCnt=1$m=1$l=0.5$w=5$ view layout
    Reading cell pmos13_multi$rightCnt=1$leftCnt=1$polyCnt=1$m=1$l=0.7$w=5$ view layout
    Reading cell pmos13_multi$rightCnt=1$leftCnt=1$polyCnt=1$m=1$l=1.2$w=1$ view layout
    Reading cell polyres view layout
    Reading cell polyres view symbol
    Reading cell polyres$numsegs=1$r=1000$w=2$ view layout
    Reading cell test view schematic
    # INFO: Rebinding library example
    # INFO: Rebinding library libgex01
    # INFO: Rebinding library basic
    ui().openCellView("example", "nmos13_multi", "symbol")
    # INFO: Reading preferences file /home/edamgr/.gladerc
    # INFO: Opened cell nmos13_multi view symbol
    ui().selectPoint(-450, 250, 0)
    ui().selectPoint(-200, 200, 0)
    ui().openCellView("libgex01", "nmos_x", "symbol")
    # INFO: Reading preferences file /home/edamgr/.gladerc
    # INFO: Opened cell nmos_x view symbol
    ui().selectArea(-3390, -4291, 12999, 10853, 0)
    ui().editCut()
    # INFO: Deleting 1 object(s)
    ui().selectPoint(0, 5850, 0)
    ui().editCut()
    # INFO: Deleting 1 object(s)
    ui().selectPoint(-2200, -50, 0)
    ui().selectArea(-4246, -1370, -568, 883, 0)
    ui().editCut()
    # INFO: Deleting 1 object(s)
    ui().winPanDown()
    ui().winPanUp()
    ui().selectPoint(-3350, 150, 0)
    ui().editMove()
    ui().selectPoint(-4450, 0, 0)
    ui().editMove()
    # INFO: 1 object(s) moved by delta = (3.500, 0.000)
    ui().properties("libgex01", "nmos_x", "symbol")
    # INFO: Creating pin d at (0.550, 1.050)
    # INFO: Creating pin s at (0.550, -0.600)
    # INFO: Creating pin b at (0.300, 0.000)
    ui().selectPoint(600, 1050, 0)
    ui().editMove()
    ui().selectPoint(550, 1100, 0)
    ui().editMove()
    # INFO: 1 object(s) moved by delta = (0.000, -0.500)
    ui().selectPoint(-900, 0, 0)
    ui().editMove()
    # INFO: 1 object(s) moved by delta = (0.650, 0.000)
    ui().zoomOut(-850, -1177, 1171, 1045)
    ui().editCreateLine()
    # INFO: Adding line point #1 at (0.450, 0.550)
    # INFO: Adding line point #2 at (0.000, 0.550)
    # INFO: Adding line point #3 at (0.000, -0.650)
    # INFO: Adding line point #4 at (0.450, -0.650)
    # INFO: Created line with 4 points
    ui().selectPoint(450, -650, 0)
    ui().selectPoint(600, -600, 0)
    ui().editMove()
    ui().selectPoint(550, -600, 0)
    ui().editMove()
    # INFO: 1 object(s) moved by delta = (0.000, -0.050)
    ui().editCreateLine()
    # INFO: Adding line point #1 at (-0.150, 0.000)
    # INFO: Adding line point #2 at (0.200, 0.000)
    # INFO: Created line with 2 points
    ui().selectPoint(200, 0, 0)
    ui().editLabel()
    # INFO: Creating label d on layer pin at (0.400, 0.700)
    ui().editCreateLabel()
    ui().editLabel()
    # INFO: Creating label s on layer pin at (0.400, -0.500)
    ui().editCreateLabel()
    ui().editLabel()
    # INFO: Creating label g on layer pin at (-0.200, 0.200)
    ui().editCreateLabel()
    ui().editLabel()
    # INFO: Creating label b on layer pin at (0.200, 0.200)
    ui().selectArea(-1042, -240, 959, 1056, 0)
    ui().selectPoint(1550, 400, 0)
    ui().winRedraw()
    ui().winFit()
    ui().selectPoint(400, 600, 0)
    ui().selectPoint(400, 650, 0)
    ui().properties("libgex01", "nmos_x", "symbol")
    # INFO: Changed layer from pin drawing to text drawing
    ui().selectPoint(-150, 150, 0)
    # INFO: Changed layer from pin drawing to text drawing
    ui().selectPoint(450, -550, 0)
    # INFO: Changed layer from pin drawing to text drawing
    ui().selectPoint(150, 100, 0)
    ui().selectPoint(250, 100, 0)
    ui().selectArea(3, -125, 308, 237, 0)
    # INFO: Changed layer from pin drawing to text drawing
    ui().selectPoint(250, 550, 0)
    ui().properties("libgex01", "nmos_x", "symbol")
    ui().selectPoint(100, 0, 0)
    ui().selectPoint(1150, -250, 0)
    ui().fileSaveLib()
    ui().fileSaveLibAs()
    # INFO: Saving library libgex01 to /eda/gsessions
    Writing cell nmos_x view symbol
    ui().fileSaveCell()
    # INFO: Saving cellview /eda/gsessions/libgex01/nmos_x/symbol
    ui().selectPoint(1800, 550, 0)
    ui().openCellView("libgex01", "cgex01_01", "schematic")
    # INFO: Reading preferences file /home/edamgr/.gladerc
    # INFO: Opened cell cgex01_01 view schematic
    ui().winFit()
    ui().editInstance()
    # INFO: Creating instance I0 (master libgex01 nmos_x symbol) origin (2.050 1.700) orientation R0
    ui().editInstance()
    # INFO: Creating instance I1 (master basic gnd symbol) origin (2.750 0.500) orientation R0
    ui().editInstance()
    # INFO: Creating instance I2 (master basic vdd symbol) origin (2.800 3.100) orientation R0
    ui().fileSaveCell()
    # INFO: Saving cellview /eda/gsessions/libgex01/cgex01_01/schematic
    ui().selectPoint(2600, 1050, 1)
    ui().selectPoint(2750, 600, 1)
    ui().selectPoint(2750, 500, 1)
    ui().selectPoint(2600, 1050, 1)
    ui().selectPoint(3950, 1100, 1)
    ui().selectArea(3253, 432, 4011, 1531, 1)
    ui().selectArea(3339, 373, 4207, 1488, 1)
    ui().selectPoint(3800, 950, 1)
    ui().selectPoint(2350, 500, 1)
    ui().selectPoint(2300, 550, 1)
    ui().selectPoint(3450, 550, 1)
    ui().selectPoint(2800, 3200, 1)
    ui().selectPoint(3350, 1950, 1)
    ui().selectPoint(3200, 700, 1)
    ui().selectPoint(3700, 1800, 1)
    ui().selectPoint(3550, 1700, 1)
    ui().zoomOut(590, -1763, 4670, 4136)
    ui().winFit()
    ui().selectPoint(3900, 1100, 1)
    ui().selectPoint(3900, 1100, 1)
    ui().selectPoint(3900, 1150, 1)
    ui().selectPoint(3850, 1200, 1)
    ui().selectPoint(3850, 1200, 1)
    ui().selectPoint(3950, 1200, 1)
    ui().selectArea(3954, 1192, 3979, 1207, 1)
    ui().selectArea(3984, 1137, 4019, 1202, 1)
    ui().selectArea(4024, 1132, 4044, 1152, 1)
    ui().selectPoint(4100, 1150, 1)
    ui().selectPoint(4100, 1200, 1)
    ui().selectPoint(4050, 1400, 1)
    ui().selectPoint(4050, 1400, 1)
    ui().selectPoint(4050, 1400, 1)
    ui().selectPoint(4050, 1400, 1)
    ui().selectPoint(4050, 1400, 1)
    ui().selectPoint(4050, 1400, 1)
    ui().selectPoint(4050, 1400, 1)
    ui().selectPoint(4050, 1400, 1)
    ui().selectPoint(4050, 1400, 1)
    ui().selectPoint(4050, 1400, 1)
    ui().selectPoint(4200, 1150, 1)
    ui().selectArea(4205, 1162, 4380, 2454, 1)
    ui().selectArea(3779, 380, 5206, 2515, 1)
    ui().editCreateWire()

    December 12, 2016 at 5:26 pm in reply to: Numerical format problem #1856
    dgvic
    Participant

    Hi,
    the problem seems to be solved with this workaround.

    Thank you!

    December 12, 2016 at 2:16 pm in reply to: Numerical format problem #1854
    dgvic
    Participant

    Hi all,
    I have installed glade in linux mint 18 and 17.1, and in both versions I have the same problem. Glade doesn't seem to recognize the '.' as the separator for the decimal part; it recognizes the ',' character.

    Since I am in Spain, I am working with the Spanish keyboard layout, but I have setup the OS so that the numerical format recognizes '.' as the decimal separator character. Other applications, such as OpenOffice, work fine and recognize the '.' character.

    This is a problem when I load the example.tch file that comes with glade because any of the numerical values inside the file is properly read.

    Does anyone has a similar problem? Is this configurable in any way from glade?

    Thanks and regards

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)